|  | | |  |
How to Order |
Saturday, March 20, 2010
| |
| |
| |
|
 |
| A&K stocks Crane Rail in 33' and 39' lengths in 104 lb. through 175 lb., drilled to the standards listed in the table below. Standard Joint Bars are inventoried in 34" lengths, and drilled to match the rail. |
 |
How To Order Crane Rail
To order Standard Crane Rail give your A&K Rail and Track Specialist the following specifications:
1. Rail Section Identity.
2. Number of 33 or 39 foot lengths required (allow for
one short length in each run to provide staggered joints).
3. Number of pairs of matching joint bars.
4. Number of heat-treated machine bolts and spring washers.
5. Crane Rail accessories.
If the installation requires special lengths or special drilling, specify drilling (including required dimensions A thru H in the table) and lengths of rail and joint bars. |
Standard Drilling Specifications Table |
Crane
Rail
Section |
Spacing In |
Hole
Dia. In. |
Elev.
In. |
Bolt Dimensions In. |
| A |
B |
C |
D |
E |
F |
G |
H |
| 104-lb |
4 |
5 |
6 |
1 1/16 |
2 7/16 |
1 |
5 |
2 1/4 |
| 105-lb |
4 |
5 |
6 |
15/16 |
2 13/64 |
7/8 |
4 7/8 |
1 1/2 |
| 135-lb |
4 |
5 |
6 |
1 3/16 |
2 15/32 |
11/8 |
5 1/2 |
2 1/2 |
| 171-lb |
4 |
5 |
6 |
13/16 |
25/8 |
11/8 |
6 |
2 1/2 |
| 175-lb |
4 |
5 |
6 |
1 3/16 |
2 21/32 |
11/8 |
6 |
2 1/2 |
| A&K Rail and Track Specialists will assist you in selecting the proper rail sections, joint bars, and accessory items to complete your installation to your particular specifications. A&K offers prompt delivery of all your Crane Rail requirements in one shipment. |
|
 |
 |
Hook Bolt Drilling
Where Crane Rail is to be installed with Hook Bolts, furnish your A&K Rail and Track Specialist with the runway specifications for correct drilling of the rail. Bolts are installed in pairs and spaced according to capacity of the Crane (See diagram at left). For additional information on Hook Bolts, click here. |
|
| |
| |
TOLL FREE 1.800.453.8812 |
| Copyright © 2007 A&K Railroad Materials, Inc. All rights reserved. |
| |
|